Wind generator parts

To see a list of components to make a complete system, click here

Displaying 1 to 23 (of 23 products)

Product Image	Item Name-	Price
	Bracket basic kit SS (1.5mm) Components for stainless steel bracket: 2 x 25mm square tube with 12mm centre hole and four 10mm holes (spacing 280mm) for mounting the stator (different size holes can be made on request). 12mm rod for mounting vane. 38mm round pipe (1.5mm wall) at base for mounting on pole or tower - note: internal diameter 35mm. Bolts not included. Dimensions 38x65x500mm, 1600g.	R420.00 Add:
	Bracket basic SS (1.5mm), assembled Welded stainless steel bracket: 2 x 25mm square tube with 12mm centre hole and four 10mm holes (spacing 280mm) for mounting the stator (different size holes can be made on request). 12mm rod for mounting vane. 38mm round pipe (1.5mm wall) at base for mounting on pole or tower - note: internal diameter 35mm. All weld points 'pickled' to preserve stainless steel. Bolts not included. Dimensions 490x320x280mm, 1.7kg.	R575.00 Add:
	Bracket basic kit SS (2mm) Components for stainless steel bracket: 2 x 25mm square tube with 12mm centre hole and four 10mm holes (spacing 280mm) for mounting the stator (different size holes can be made on request). 12mm rod for mounting vane. 38mm round pipe (2mm wall) at base for mounting on pole or tower - note: internal diameter 34mm. Bolts not included. Dimensions 38x65x500mm, 1600g.	R485.00 Add:
	Bracket basic SS (2mm), assembled Welded stainless steel bracket: 2 x 25mm square tube with 12mm centre hole and four 10mm holes (spacing 280mm) for mounting the stator (different size holes can be made on request). 12mm rod for mounting vane. 38mm round pipe (2mm wall) at base for mounting on pole or tower - note: internal diameter 34mm. All weld points 'pickled' to preserve stainless steel. Bolts not included. Dimensions 490x320x280mm, 1.83kg.	R642.00 Add:
	Bracket to stator bolt and nut set M10 bolt set for attaching stator to bracket. 2 x 110mm and 2 x 120mm 10mm threaded rod. 16 nuts, 16 flat washers and 12 star lock washers. All stainless steel. Total 440g.	R188.00 Add:
	Yaw bearing (16mm) Swivel mount for 34mm or 35mm internal diameter tube. Includes 450mm 16mm stainless steel tube, two caps and two bushes made of cast polyurethane. Centre hole is clear to allow wires to be passed through. PLEASE SPECIFY LOWER AND UPPER INTERNAL DIAMETER WHEN ORDERING: 34mm or 35mm (note that 34mm fits into 38mm pipe with 2mm wall thickness). Dimensions 450x40x40mm, 400g.	R215.00 Add:
	Yaw bearing (19mm) Swivel mount for 34mm or 35mm internal diameter tube. Includes 450mm 19mm stainless steel tube, two caps and two bushes made of cast polyurethane. Centre hole is clear to allow wires to be passed through. PLEASE SPECIFY LOWER AND UPPER INTERNAL DIAMETER WHEN ORDERING: 34mm or 35mm (note that 34mm fits into 38mm pipe with 2mm wall thickness). Dimensions 450x40x40mm, 400g.	R255.00 Add:
	Stainless steel tube 34mm Stainless steel tube with outside diameter 34mm and 1.5mm wall thickness, 450mm long. Fits inside 38mm (1.5mm wall) stainless steel tube, so suitable for use in mounting stainless steel bracket on pole or tower. Dimensions 35x35x450mm, 550g.	R71.00 Add:
	Stator 9 x 75 x 1mm Stator with 9 coils of 75 turns each of 1mm copper wire arranged in three phases, embedded in glass fibre reinforced epoxy. Connector block for each end of three phases. Mounting holes 280mm apart diagonally, centre hole 115mm diameter. Note that stators are made to order, e.g. can also be 110 turns of 0.8mm copper wire. Total size 290 x 290 x 8mm, 1230g.	R1620.00 ... more info Sold Out
	Rotor plate 250 x 5mm, centre 12m hole only Precision cut mild steel rotor plate with centre 12mm hole. Note that two plates are usually required per generator. Dimensions 250x250x5mm, 1975g.	R60.00 Add:
	Rotor plate 250 x 5mm, centre 30mm hole, 4 x 12mm holes Precision cut mild steel rotor plate with centre 30mm hole, and 4 x 12mm holes for bolts 64mm apart. Note that two plates are usually required per generator. Dimensions 250x250x5mm, 1900g.	R70.00 Add:
	Rotor set Two 250mm by 6mm mild steel rotor disks, a 12mmx37mm bearing, a 12mmx40mm bearing with extended inner sleeve and locking collar, and two bearing holding rings. Magnets need to be added and fixed to the rotor plates, which then need to be mounted on a 12mm shaft. NB: Magnets, bolts, nuts and shaft not included. Dimensions 250x250x30mm, 4930g.	R390.00 Add:
	Rotor bolt and nut set Bolt set for attaching rotors to each other, the bearings and the hub. 4 x M12 110mm threaded rod, 24 nuts, 24 flat washers and 8 star lock washers. All stainless steel. Total weight 864g.	R380.00 Add:
	Bearing, 12mm pillow block Self aligning bearing with 12mm centre hole, and lubricating nipple. Mounting hole spacing 90.5mm diagonally, 64mm square. Two usually required per generator. Dimensions 90x90x36mm, 670g.	R49.00 Add:
	Bearing, 12/37mm Deep groove bearing with inside diameter 12mm, outside 37mm. Rubber seal. Suitable for mounting rotor on 12mm shaft. Dimensions 37x37x12mm, 60g.	R23.00 Add:
	Bearing, 12/40mm with collar Bearing with 12mm inside diameter and 40mm outside diameter, metal seal. Extended inner ring with acentric locking collar with grub screw. Suitable for mounting front rotor on 12mm shaft. Grub screw in collar allows rotors to be locked in place. Dimensions 40x40x29mm, 136g.	R35.00 Add:
	Winding wire - 1mm, per metre Enameled insulated copper wire suitable for winding coils. Approx. 143 m/kg, 7g/m.	R0.98 Add: Min: 72
	Winding wire - 1.6mm, per metre Enameled insulated copper wire suitable for winding coils. Approx. 55 m/kg, 18 g/m.	R3.54 Add: Min: 22
	Stainless steel tube 16mm Stainless steel tube with outside diameter 16mm (actually 15.9mm) and 1.5mm wall thickness, 500mm long. Suitable for vane to mount on 12mm bar of bracket. Can easily be bent by hand to required angle. Dimensions 16x16x500mm, 225g.	R29.00 Add:
	Vane mount 16mm stainless steel tube (bent to fit over 12mm bar), with holes, 5mm bolts, lock nuts and washers. Weighted with 150mm of 12mm stainless steel rod. Suitable for mounting vane panel onto bracket (panel vane required). Dimensions 450x250x16mm, 300g.	R146.00 Add:
	Vane panel This very simple piece is not for sale here. It is just a piece of plywood (rigid plastic would also do) with two holes drilled to fit the bolts of the vane mount.	... more info Sold Out
	Bearing 16-35 Deep groove ball bearing with rubber seals. Inside diameter 16mm, outside 35mm. Suitable for inside fit of 38mm 1.5mm pipe, for swivel mount. Dimensions 35x35x11mm, 43g.	R61.00 Add:
	Hub for mounting blades 12mm marine ply disk with four 12mm holes for drive bolts and 5 6mm holes for mounting each of three blades. Coated both sides with epoxy resin and glass fibre. 300x300x14mm, 540g.	R550.00 Add: