Different Stator needed??

Winding the coils and making the stator

Different Stator needed??

Postby Ryanmun on Thu Sep 23, 2010 3:25 pm

Hi, I hope you can help. I have bought 24 neodymium magnets 50mm x 25mm x 10mm. Unfortuneately their are magentised from end to end not face to face. Will this cause a problem using a standard style of stator/coil winding or will i need to wind some special kind. I only need 12v and about 100w.

Thanks in advance for any help/assistance.

Posts: 2
Joined: Mon Sep 13, 2010 12:13 pm

Re: Different Stator needed??

Postby windgat on Sun Sep 26, 2010 5:25 pm

Ouch! Those magnets will not work well at all. As far as I know you cannot make a stator to suit them. I suggest you get the right magnets...
Founding member
Posts: 558
Joined: Mon Apr 30, 2007 10:49 am
Location: Cape Town, South Africa

Re: Different Stator needed??

Postby siamon on Tue Aug 13, 2013 2:28 pm

Great question(s)! I don't know how hot the stator gets - I have never monitored it. Of course, there is a neat factor in that the hotter the stator gets, the harder the wind must be blowing, which means the stator is naturally cooled if it is exposed to the wind. Some like Greystoke on this forum will be the oen you need when it comes to formulas and working out the efficiency gain analytically.
Posts: 1
Joined: Tue Aug 13, 2013 2:26 pm

Return to Stators and coils

Who is online

Users browsing this forum: No registered users and 1 guest